Copyright © 2026 ROTER Fresh Air Technology Wuxi Co., Ltd. All Rights Reserved. Website Design by Wangke
A smart fresh air system brings filtered outdoor air into a room and monitors what it is doing while it does it. ROTER's smart fresh air range covers two physical formats and three ventilation duties, so the same control and filtration platform can be used in a bedroom, an office or a small clinic.
| Model | Key features | Link |
|---|---|---|
| Standard / haze removal total heat recovery fresh air ventilator | Smart mode real-time monitoring with intelligent control, high-efficiency filtration with 99.9% PM2.5 removal, extra-large airflow for high efficiency and fast response | Details |
| DC inverter total heat recovery fresh air ventilator | Smart mode control, multi-layer filter with 99.9% PM2.5 removal, full-circle circulation with extra-large airflow and faster response, with inverter fan control | Details |
| Single flow positive pressure haze removal fresh air ventilator | Dual-layer filtration of primary plus high-efficiency media, 99.9% PM2.5 removal, intelligent control with an HD LCD screen, compact size for quick installation | Details |
The smart mode monitors the air continuously and adjusts the unit rather than running it flat out. On the wall-mounted and cabinet-type systems that means a live readout of particulate level on a 4.3-inch touchscreen, with the fan response managed automatically. On the packaged ventilators it means the same real-time monitoring and intelligent control, together with a filtration stage that is sized for a 99.9% PM2.5 removal rate rather than a single filter.
The single flow unit holds the room slightly above surrounding pressure. That matters in a bedroom or a clinic, because air that leaks in around a door comes from the corridor rather than from outside, and the corridor is the space you have not filtered. Maintaining positive pressure keeps the untreated air out.
For a residence or a villa, the fresh air volume is normally 30 to 50 m³/h per person, with 1 to 2 air changes per hour for general rooms. Multiply by the number of occupants and by the room volume, and take the larger figure. Where the space has a specific dust or particulate requirement, such as a workshop or a small clinic, specify on the haze removal unit rather than the standard model.
For advice on a specific room, send the floor area, ceiling height and occupancy, and the ROTER engineering team will propose the model and airflow.